Eddy Current (NFe): Measuring the thickness of Non-conductive coating on non-magnetic metal substrate, such as rubber, plastic, paint, oxide on the base of aluminum, copper, zinc, tin.

Technical Parameters

Technical Parameters
Model No.		Leeb251A
Measuring principle		NFe
Measuring range (µm)		0~1250μm
Probe		Settled
Shell		Plastic
Accuracy		±(1~3%H+1) μm; H refers to the thickness of testing piece
Minimum resolution (µm)		0.1μm
Min curvature of the min area (mm)		Convex1.5 Concave9
Diameter of the min area (mm)		Φ7
Critical thickness of substrate (mm)		0.5
Memory		200 groups measured data
Dimensions		1155523mm
Power supply		Alkaline battery
Standard Configuration		Main unit,5 calibration specimens (48.5μm,99.8μm,249μm,513μm 1024μm),1 probe & substrate
Optional Accessories		Probes,Specimens,1 leather sheath

Basic Calibration (5 Specimens Calibration)

1) 5 Specimens Calibration

Press "Menu", select " Correcting" and confirm it (button "Menu"= confirm)

2) 0 Point

Press the probe on the Fe substrate for a few seconds,until it displays "Sure".

Pick up the probe and go next step.

3) 1 piece

Use S1 ( 48.5 um). Keep the probe testing on S1 for a few seconds until it displays "Sure".

Pick up the probe, waiting for the testing result value.

Press "↑""↓" "Menu", adjust the value(49.4 um) to the same as the S1( 48.5 um). For detail, please check the attached video. After finish, Press " Menu" to save, and go next step.

4) Repeat the above steps, follow the screen display to finish S2,S3,S4,and S5.

5) Last step: Press "Menu" to confirm and save data.

6) Finish.

High quality Equipment Box:

Product Tags:

Eddy Current Coating Thickness Gauge NFe Metal Probe Limit Setting Function

Leeb Hardness Tester

Micro Vickers Hardness Tester

Vickers Hardness Tester

Rockwell Hardness Tester

Brinell Hardness Tester

Metallurgical Microscope

Ultrasonic Flaw Detector

Ultrasonic Thickness Gauge

Coating Thickness Gauge

Surface Roughness Tester

Magnetic Flaw Detector

Wire Rope Flaw Detector

Shore Hardness Tester

Eddy Current Coating Thickness Gauge NFe Metal Probe Limit Setting Function

eddy current thickness measurement

uni_t coating thickness gauge

eddy current inspection method