Chongqing Leeb Instrument Co.,Ltd
High Quality Products & Professional Service
Add to Cart
Settled Fe Probe Coating Thickness Gauge Film Thickness Tester
Settled Fe Probe And Plastic Shell Coating Thickness Gauge With Switch off automatically or manually
Functions & Features
Technical Parameters
| Technical Parameters | ||||||||
| Model No. | Leeb250A | |||||||
| Measuring principle | Fe | |||||||
| Measuring range (µm) | 0~1250μm | |||||||
| Probe | Settled | |||||||
| Shell | Plastic | |||||||
| Accuracy | ±(1~3%H+1) μm; H refers to the thickness of testing piece | |||||||
| Minimum resolution (µm) | 0.1μm | |||||||
| Min curvature of the min area (mm) | Convex1.5 Concave9 | |||||||
| Diameter of the min area (mm) | Φ7 | |||||||
| Critical thickness of substrate (mm) | 0.5 | |||||||
| Memory | 200 groups measured data | |||||||
| Dimensions | 115*55*23mm | |||||||
| Power supply | AAA Alkaline battery | |||||||
| Standard Configuration | Main unit,5 calibration specimens (48.5μm,99.8μm,249μm,513μm 1024μm),1 probe & substrate | |||||||
| Optional Accessories | Probes,Specimens,1 leather sheath | |||||||
| Error code | Implications of error code | The cause and solution |
| E02 | Probe or instrument damage | Repair probe or instrument |
| E03 | Probe or instrument damage | Repair probe or instrument |
| E04 | Measured values occur large fluctuations (For example when soft layer measurements); Magnetic field effect | When the measure menton the softcover, auxiliary device to measure should be adopted;Stay away from the strong magnetic field environment |
| E05 | Too close to the probe from the metal substrate when the phone is switched on | Probe from the metal substrate |
| E08 | Probe or instrument damage | Repair probe or instrument |
| E11 | Probe model in conformity with this group of the original data corresponding to the probe model | Replace the suitable probe Choose an unused group units Delete after calibration again |
| E15 | Zero deviation is too big, can not be zero | Select the appropriate substrate or repair equipment |
| E20 | This set of unit for calibration value | Choose an unused group unit Or delete after calibration again |
High quality Equipment Box:
